You are currently viewing 5 Ways to Troubleshooting a Ninja Blender Won’t Turn On

5 Ways to Troubleshooting a Ninja Blender Won’t Turn On

  • Post author:
  • Post category:Blender Questions
  • Post last modified:January 21, 2023
  • Reading time:6 mins read

If you’re the proud owner of a Ninja blender but are having some technical difficulties getting it to turn on – don’t panic! 

You’re not alone. 

Many people have experienced this issue, and in this blog post we’ll provide you with some troubleshooting tips and advice on how to get your Ninja blender working again. 

Whether your Ninja blender won’t turn on right away or it turns off intermittently, you’ll find some helpful information here. 

We’ll talk you through the most common causes of these issues, and help you identify the best solution. So read on, and get your Ninja blender back up and running in no time!

Ninja Blender Won't Turn On image 2

1. Check the power supply

If your Ninja blender isn’t turning on, the first thing you should check is the power supply. Ensure that the power cord is securely plugged into both the outlet and the blender itself.

If it is, then you should check the fuse or circuit breaker in the circuit panel of your home. If the fuse or circuit breaker has tripped, reset them and try to power on the blender once again.

If the problem persists, check the power cord for any visible signs of damage and replace it if necessary. If your Ninja blender still won’t power on, take it to a professional for further diagnosis and repair.

2. Troubleshoot the cord and plug

Troubleshooting the cord and plug of a Ninja blender is often a simple fix when the blender is not turning on. Check the power outlet to ensure that it is providing power.

If the power outlet is working, inspect the cord for any fraying or damage. If the cord appears to be in good condition, check for any obvious signs of a loose connection to the power outlet.

See Also:  Can An Immersion Blender Crush Ice? We Have the Correct Answer!

If the cord is properly connected, and the power outlet is working, then try plugging the cord into a different power outlet to confirm the issue is not with the power outlet.

If the Ninja blender still does not turn on, it may be a sign of a larger issue and should be serviced by a qualified technician.

Ninja Blender Won't Turn On

3. Check the control pad

If your Ninja blender won’t turn on, you may need to check the control pad. First, make sure that the appliance is plugged in securely, as this is a common cause of the issue.

Next, be sure that the power switch is turned to the ‘on’ position. If the power indicator light is not illuminated, the power cord may have a fault and needs to be replaced.

If the power indicator light is on and the blender still won’t turn on, it is likely that the control pad is faulty. In this case, you may need to contact technical support, as a replacement may be necessary.

By following these steps, you should be able to determine the cause of your blender’s power issue and take the appropriate steps to resolve it.

4. Reset the motor base

If you are having difficulty turning on your Ninja Blender, it is important to first check the control pad. Make sure the power switch is in the ‘on‘ position.

Additionally, check the outlet to ensure it is on and receiving power. If the outlet is receiving power, it is possible the control pad may not be functional and will require replacement.

If the outlet is not receiving power, reset the circuit breaker or replace the fuse. If the Ninja Blender will still not turn on, it is recommended to bring it in for service and repair.

See Also:  Can You Use an Immersion Blender for Mashed Potatoes?

Taking the necessary steps to diagnose the issue can help you identify the root cause and provide a solution.

5. Clean and dry the blender motor base

If your Ninja blender will not turn on, it is likely due to a wet or dirty motor base. To resolve this issue, you should unplug your blender and then clean and dry the motor base thoroughly.

Start by wiping the base with a damp cloth to remove any residue. Allow the base to dry completely, and then check for any debris or dirt that may be stuck in the grates.

If necessary, use a brush to remove any dirt. Once the base is completely dry and clean, plug the blender back in and try to turn it on. If the blender still won’t turn on, you may need to contact a Ninja customer service representative for further assistance.

In conclusion, a Ninja blender won’t turn on can be a frustrating problem. However, there are a few steps that you can take to troubleshoot the issue.

First, check to make sure that the blender is plugged in and that the outlet is working properly. If that doesn’t work, try resetting the power button.

And as a final step, you may need to contact the manufacturer for help. With some patience and determination, you should be able to get your Ninja blender working again. Read more information at:

Taylor Klaus

Taylor Klaus is an expert bartender with 5 years of experience, she's written over 100 blender tutorials and smoothie recipes. She's a fan of nutrient-rich puree drinks. She wants to help people have a healthier life.

Leave a Reply